Device introduction:

  this machine introduction of South Korea advanced coating moulding technology combined with years of production experience in comprehensive coating moulding machine itself.

Laser is very suitable for pet, opp film products.

Equipment advantages:

1. The coating and moulding process, the two devices combined into one line. Only one device can be out of the laser effect. Save a person Labour costs and the cost of production.

2. Die template USES the new material (PET/PVC) template, don't need the traditional nickel version, save the cost of production.

3 .to produce laser has excellent effect on membrane resistance to high temperature, 120 degrees now domestic way, the way we can reach 170 degrees.

4. The current way of making the product scope is limited, mainly PET12-50 microns, the way we can reach 12-150 microns, PET/OPP

Main materials: PET/OPP

Glue, solvent, water soluble

Coating method: scraper coating method

Laser: die

1、 有效薄膜宽度 Effective width of film ：       800mm

2、 辊面宽度 Roller surface width：           1000mm

3、 机械速度Machanical speed：           10-100（生产速度 试工艺而定The production speed test process）,一般PET30米/min,OPP60米/min

4、 放卷直径Unwinding Diameter ：           800mm

5、 收卷直径 Winding Diameter ：           800mm

6、 加热干燥方式 Heating drying methods：       电加热/蒸汽/导热油等等   Electricity heat/steam/oil heat, and so on

7、 温度控制 The temperature control：           烘箱Oven to 50~180℃±3℃，         模压moulded to 50~350℃±3℃ 

8、 卷取边缘整齐 Winding is neat：      ±0.2mm

9、 装机总功率 Power  ：         约about120kW

10、设备外型尺寸 Overall Dimensions：       (长 x 宽 x 高)8000x2600x3200mm（800机型）

可根据产品要求 特殊订制设备。

Can be made according to the product requires special equipment.